E-COAT+3
Five control unit configurations covering full-production MASTER/MASTER P3 lines through to lab-scale LAB DI/LAB BI-C systems. Actual electrostatic output (120 kV / 120 µA) is generated inside the paired E-GUN+3 gun, not the control unit — see E-GUN+3 for gun-level specs.
MASTER
Full-featured pump-fed control unit — Bluetooth, UDP/IP, 50-recipe memory, Fast Purge.
| Part Code | B07ECMU01+3 |
| Nominal Input Voltage | 100–240 VAC |
| Input Power | 150 VA |
| Gun Output (Control Unit Side) | Max. 20 Vp-p / 1.5 A |
| Protection Class | IP54 |
| Certification | CE, ATEX — II 3(2)D |
| Recipes | 50 (4 factory presets, P01–P50) |
| Dimensions (W×H×D) | 220 × 182 × 215.25 mm (up to 264.05 mm incl. rear connectors) |
MASTER P3
Pump-fed upper segment device where pneumatic and electrical parameters are digitally controlled through the front panel. Factory settings, 50 customizable electrical/pneumatic specifications, dual triggering, PLC automation, and Bluetooth connectivity make the MASTER P3 optimal for advanced manual and automated applications needing pumped powder for high surface quality and/or higher output. The patented E-Feed+3 AP3 application pump (TriFlow technology) delivers up to 900 grams/minute via dense-phase powder transfer.
| Nominal Input Voltage | 100–240 VAC |
| Input Power | 150 VA |
| Gun Output (Control Unit Side) | Max. 20 Vp-p / 1.5 A |
| Protection Class | IP54 |
| Certification | CE, ATEX — II 3(2)D |
| Max Powder Output (with AP3) | 900 g/min (at 100% paint) |
| Recipes | 50 (4 factory presets, P01–P50) + Master/Slave UDP/IP networking |
PRO
E-COAT+3 PRO Series devices are first-segment devices in which pneumatic and electrical parameters are controlled by buttons and regulators on the front panel. Electrical controls provide the opportunity to adjust air values independently while connected to voltage and current. Factory settings and 50 different customizable electrical prescriptions make the E-COAT+3 PRO an economical solution, especially for manual and basic applications, with automatic and manual options and a wide range of accessories.
| Part Code | B07ECPU03 |
| Nominal Input Voltage | 100–240 VAC |
| Input Power | 150 VA |
| Gun Output (Control Unit Side) | Max. 20 Vp-p / 1.5 A |
| Protection Class | IP54 |
| Certification | CE, ATEX — II 3(2)D |
| Max Powder Output (with INJ) | 420 g/min (at 0.3 MPa / 3 bar) |
| Recipes | 50 (3 factory presets, P01–P50) — no Boost Mode slot |
| Bundle Configurations | PRO H (hopper-fed), PRO M (bag-fed) |
LAB DI
The E-COAT+3 LAB DI powder coating device is the perfect choice for tabletop use. This device offers unparalleled precision and flexibility, allowing users to apply powder coating with the E-Feed+3 VI injector. The E-COAT+3 LAB DI series contains all the electrical and pneumatic features of the E-COAT+3 Master/PRO models. The E-FEED+3 VI inline type injector, compatible with the E-GUN+3 C1/C2 model gun, is easy to install and remove, offering an excellent painting experience for short-term applications. Our device offers fast and easy use by suctioning directly from the paint bag. Choose the 500 ml paint container for small-scale jobs or the 1000 ml paint container for large areas or long-term applications. It adapts to all kinds of projects with three different paint reservoir options.
E-COAT+3 LAB MASTER DI
- Quick inspection of the workpiece with built-in LED illumination
- E-GUN+3 C1 with E-FEED+3 VI Inline
- Bluetooth connection enables data logging and analysis
- Strong loading performance with 120kV–120µA charging
- Fast navigation between recipes with double triggering
- Ability to save 50 different prescriptions
- Accurate static voltage and current control with feedback
- Hybrid proportional valve system not affected by inlet pressure changes
E-COAT+3 LAB PRO DI
- E-FEED+3 VI Inline
- The capability to save 50 different recipes
- Feedback-based precision static voltage and current control
- Easy operation thanks to the rotating adjustment knob
- Independent pneumatic adjustment option
- Economical solution ideal for manual and basic applications
- Strong loading performance with 100kV–100µA charging capacity
| Configurations | Lab – Master DI, Lab – PRO DI (Cup) |
| Bundle Contents | E-GUN+3 C1, E-FEED+3 VI Inline injector, 500 ml / 1000 ml cup |
| Control Electronics | Reuses MASTER or PRO control unit spec (see above) |
LAB BI-C
The E-COAT+3 LAB BI-C powder coating device is the perfect choice for tabletop use. This device offers unparalleled precision and flexibility, allowing users to apply powder coating with the E-Feed+3 VI injector. The E-COAT+3 LAB BI-C series contains all the electrical and pneumatic features of the E-COAT+3 Master model. The E-FEED+3 VI inline type injector, compatible with the E-GUN+3 C1/C2 model gun, is easy to install and remove, offering an excellent painting experience for short-term applications.
- E-GUN+3 C1 with E-FEED+3 VI Inline
- Fast navigation between recipes with double triggering
- Strong loading performance with 120kV–120µA charging capacity
- Bluetooth connection enables data logging and analysis
- Quick inspection of the workpiece with built-in LED illumination
- Works with E-COAT+3 MASTER control unit
- Ability to save 50 different prescriptions
- Hybrid proportional valve system not affected by inlet pressure changes
- Accurate static voltage and current control with feedback